Products
Horizontal single stage water pump
Flow Rate:16~270 m³/h
Head range: 3.5~10 m
Caliber:50~150(mm)
Motor Power:0.75~7.5KW
Speed range:2900/1450 r/min
Ambient temperature:≤40℃
Insulation Class: F+
IP Rating: IP55+
Maximum working pressure -
of pump system: ≤1.0MPa
Features
Configuration
| Default Configuration |
| ➣ 2-pole / 4-pole IE3 Motor |
| ➣PN16 Cast Iron Pump Body |
| ➣E-coated & Cast Iron Impeller |
| ➣304 Stainless Steel Shaft |
| Customizable Options |
| ➣PMSM (Permanent Magnet Synchronous Motor) |
| ➣VFD Motor (Variable Frequency Motor) |
| ➣Ex Motor (Explosion-proof Motor) |
| ➣IE4 Motor / IE5 Motor |
Horizontal single stage water pump Product description
The YLGZ series is intended for horizontal low-head water transfer applications where easy service access and stable base-mounted operation are required. Its layout is well suited to utility water movement, equipment matching, and circulation systems that benefit from straightforward horizontal maintenance.
Typical applications include industrial transfer duties, process water circulation, general drainage support, and other installations where reliable high-volume flow is needed in a horizontal arrangement.
Features
Product Cente
Bearings Protection
The rear cover of the motor is equipped with an oil seal, which prevent liquid or corrosive gas from entering the rear bearing during use and ensure the stability of the bearing.
High-Efficiency Direct Drive
YLGZ Horizontal Single Stage Water Pump features a close-coupled structure where the motor directly drives the pump, significantly minimizing power transmission loss.
Premium Standard Motors
YLGZ series equipped with high-performance 2-pole or 4-pole IE3 motors as standard. The series is characterized by large flow capacity, high efficiency, and ultra-low noise levels.
Proprietary Thermal Management
Our self-developed motor housing and fan cover maximize the heat dissipation area to effectively lower temperature rise and extend motor life.
Pump Structure
It adopts a direct-coupled structure, and is driven directly by an electric motor, thus reducing thenumber of spare parts. The vortex chamber, the inlet flange and the outlet flange are cast into anintegral whole.
The impeller adopts a balanced hydraulic and dynamic design and is installed through acantilever; the flow passage part is designed with multipass variable linear structure, so theproduct has high water absorption performance and high efficiency, as well as strong cavitationresistance.
It adopts high-quality mechanical seal and imported NSK bearings.
The motor is a fully enclosed, fan-cooled, squirrel-cage, direct-coupled horizontal motor.
The pump is characterized by simple structure, reliable performance, small size, light weight, lownoise, good cavitation resistance, low power consumption and convenient use and maintenance.
Caution
Prohibit damage of axle seal from idling rotation. Horizontal single stage water pump operates for a long period of time, and has serious noise and vibration due to wear, Please stop operation andcheck, lf necessary, please replace the damaged parts, and axle. The overhaul is once a year.In order for pump not to be crushed, the pipes should have its support, and not be burdened by pump. Each pump should stall its suction pipe individually, and pipe should be light possibly and less curve.Different material of pump can bear different pressure. The working pressure must be consistent with endurance pump.
Certifications
Sales And Service Network
Hot Tags: Horizontal single stage water pump, China Horizontal single stage water pump manufacturers, suppliers, factory, Horizontal Centrifugal Inline Pump, Horizontal Inline Pump, Horizontal Water Pump, inline pump, Vertical Centrifugal Water Pump, Vertical Water Pump
You Might Also Like
Send Inquiry
